首页 > 产品 > 车规专用MCU:TCAE32
TCAE32 is an AEC-Q100 qualified low-power CMOS 32-bit Arm® Cortex®-M0 MCU, designed for force sensing
and capacitive touch. It supports 8-channel force sensing detection, and up-to-26 channel capacitive touch detection.
The MCU integrates Wheatstone bridge AFE circuits, including low noise LDO (LDOVS), two-stage PGA with up to 1024x gain,
14-bit high resolution ADC, and offset canceling circuit. The PGA can cancel offset voltage while amplify weak signal
variance (i.e.<10uV) which is interested, before the signal enters the ADC. The device also integrates TinyTouch module
to implement self-capacitance touch sensing with detection algorithm.
64KB Flash
8KB SRAM
On-chip 16-MHz RC oscillator
On-chip 32-MHz clock with frequency doubler
On-chip 32-KHz RC oscillator
Up to 4 different timeout thresholds
Periodical timeout events once enabled
Full duplex series communication
Support LIN Slave function
Standard speed(100KHz) and fast speed( 400KHz)
Master and slave mode
Master and slave mode
8 channels for I2C/UART0/SPI/ADC/TinyTouch
16-bit general purpose timer/counter
Multiple modes supporting PWM generation
Integrates two touch blocks with run in parallel
With external reference capacitor
26 channels for 48-pin package and 19 channels for 32-pin package
Comparator based or ADC based detection
Configurable frequency hopping
14-bit SAR ADC
Sampling rate up to 1MSPS
8 differential or 16 single-end external channels
2-stage PGA, up to 1024x gain
Offset voltage cancellation
8-level adjustable voltages from 1.8V to 3.1V
15mA minimum
Up to 45 GPIOs for QFN48 package
Up to 29 GPIOs for QFN32 package
IDLE mode
SLEEPWALK mode
SLEEP mode