首页 > 产品 > 氛围灯驱动MCU:TCPL01x
TCPL01x is an AEC-Q100 Grade 1 qualified RGB LED driver with LIN interface, designed for automotive dynamic interior RGB light and intelligent rear light. It features 32-bit Arm® Cortex®-M0 CPU core, 64KB flash and 4kB SRAM, a LIN transceiver supporting LIN auto-addressing. The integrated current sources can be controlled by a 16-bit PWM with a 48MHz clock. This enables PWM cycle frequencies up to 730Hz with 16-bit resolution. Each of the three drivers can be used to drive external loads up to 60mA. The integrated ADC can measure the forward voltage of LEDs differentially.
--64KB Flash (64KB NVM and 2.5KB NVR)
--4KB SRAM
--On-chip 48-MHz RC oscillator
--On-chip 32-kHz RC oscillator
--LIN Transceiver compliant to LIN 2.x/ISO17987/SAE J2602
--LIN SCI with Protocol according to LIN 2.x/ISO17987/SAE J2602
--LIN Slave Network Position Detection (SNPD)
--LIN failure detection and recovery
--LIN RXD wakeup
--OTA over LIN
--Multiple-level current sources
--Bus Shunt Method (BSM) based
--Support 1Ω internal shunt or with 0.2Ω external shunt resistor
--Supports 3 channels of LED driver for RGB
--60mA Max sink current sources for each channel
--16-bit PWM controller
--3 channels of PWM output for LED dimming control
--1 channel of PWM output for time sharing control
--11-bit signed SAR ADC
--Sampling rate up to 400KSPS
--Hardware trigger ADC Sample (PWM/RTC)
--Normal
--Sleep
--Sleepwalk
--±8KV for LIN to system ground
--±4KV for VS to system ground
--±2KV for all other pins